BRUSHED HEXOHM V2 110 WATT OKL-T20 REGULATED BOX MOD

The HexOhm V2 110 Watt OKL-T20 uses the OKL2-T/20-W12 Chip and supports voltage that ranges from 3.3 volts to 6 volts. This MOD is designed to run up to 20 AMPs, and it’s rated for 110Watts of vaping power.

THE HEXOHM V2 ALSO INCLUDES A NEW SPRING LOADED 510 CONNECTION.

This is a regulated box MOD powered by Dual 18650 wired in Series and features a Spring-Loaded 510 allowing Atomizer to sit flush on the box. Just like the 50Watt, the 110 Watt's made from an aluminum enclosure with a Magnetic Door. It's also assembled in the USA!

Product Features:

• Beautifully constructed anodized billet aluminum box (w/ grey button)
• Beautifully engraved with HexOhm emblem
• OKL2-T/20-W12 chip for 110 watts of power, voltage ranging in 3.3-6v, and designed to run up 20 amps
• Reverse polarity protection
• Minimum resistance of 0.15 ohms
• Dual 18650 batteries in series
• Spring loaded 510 connection
• Magnetic door for easy battery swap
• Weight: 8oz.
• Amp: 20 Amps
• Variable Voltage: 3.3 Volts – 6 Volts
• Chip Set: OKL2-T/20-W12N2-C
• Rated Wattage: 110 Watts, but can be pushed higher
• Batteries: Dual 18650s (Not included)
• Protection: Has Reverse Polarity Protection

Product Recommendations:

• Utilize ONLY 20 Amp or higher IMR/INR Batteries!
• Used paired batteries (same make and manufacturer) at all times!
• DO NOT go above manufacturer recommended amperage or wattage limits!

Advanced User Item. Use At Your Own Risk!

NOTE: There is an inherent risk with the use of all rechargeable batteries in any circumstance. Vapecentric is not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). Vapecentric is not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.

Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.

Vapecentric will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.